Icom IC-F51 Instruction Manual page 15

EMERGENCY KEYS
➥ Push and hold to transmt an emergency call.
➥ When [Emergency Sngle (Slent)] or [Emergency Repeat (S-
lent)] s pushed, an emergency call s transmtted wthout a
beep emsson and LCD ndcaton change.
• If you want to cancel the emergency call, push (or push and hold)
the key agan before transmttng the call.
• The emergency call s transmtted one tme only or repeatedly
untl recevng a control code dependng on the pre-settng.
TX CODE ENTER KEY
Push to enter the drect ID code edt mode, for both 5-tone
and MSK. Then set the desred dgt usng [CH Up]/[CH Down]/
[TX Code CH Up]/[TX Code CH Down]. (p. 16)
TX CODE CHANNEL SELECT KEY
➥ Push to enter the drect ID code channel selecton mode. Then
set the desred channel usng [CH Up]/[CH Down]/[TX Code CH
Up]/[TX Code CH Down]. (p. 15)
➥ Whle n ID code channel selecton mode, push for 1 sec. to
enter the ID code edt mode. Then set the desred dgt usng
[CH Up]/[CH Down]/[TX Code CH Up]/[TX Code CH Down].
(p. 16)
TX CODE CHANNEL UP/DOWN KEYS
Push to select a TX code channel drectly.
ID MEMORY READ KEY
➥ Recalls detected ID codes.
• Push ths key, then push [CH Up]/[CH Down] for selecton.
• Up to 5 ID's are memorzed.
➥ Push and hold to erase the selected memorzed ID's.
PANEL DESCRIPTION
2
2
10