Conventional Operation; TurnNg Power On; Channel SelectOn - Icom IC-F15 Instruction Manual

3
■ Turning power ON
➥ Rotate [VOL] to turn power ON.
■ Channel selection
IC-F15S/F25S:
Toggle [CHANNEL SWITCH] to se-
lect the channel 1 or 2, or, push one of
[MR-CH 1] to [MR-CH 4] key to select a
channel drectly.
• The memory channels 3 and 4 are aval-
able when [MR-CH 3] and [MR-CH 4]
keys are assgned.
IC-F15/F25:
Rotate [CHANNEL SELECTOR] to se-
lect the desred operatng channel, n
sequence; or, push one of [MR-CH 1] to
[MR-CH 4] key to select a channel d-
rectly.
AUTOMATIC SCAN TYPE:
Channel settng s not necessary for ths type. When turnng the
power ON, the transcever automatcally starts scannng. Scannng
stops when recevng a call.
12

CONVENTIONAL OPERATION

[VOL]
[CHANNEL SWITCH]
[CHANNEL
SELECTOR]