Receiving And Transmitting - Icom IC-F15 Instruction Manual

3
CONVENTIONAL OPERATION

■ Receiving and transmitting

NOTE: Transmttng wthout an antenna may damage the trans-
cever. See p. 2 for antenna attachment.
Receiving:
q Rotate [VOL] to turn power ON.
w Toggle [CHANNEL SWITCH] (IC-F15S/F25S), rotate [CHAN-
NEL SELECTOR] (IC-F15/F25) or push one of [MR-CH 1] to
[MR-CH 4] key to select a channel.
For IC-F15S/F25S
The memory channels 3 and 4 are avalable when [MR-CH 3]
and [MR-CH 4] keys are assgned.
e When recevng a call, adjust the audo output level to a com-
fortable lstenng level.
Transmitting:
Wat for the channel to become clear to avod nterference.
q Whle pushng and holdng [PTT], speak nto the mcrophone at
a normal voce level.
• When a tone sgnallng system s used, the call procedure de-
scrbed on p. 13 may be necessary.
w Release [PTT] to return to receve.
IMPORTANT!: To maxmze the readablty of your sgnal;
1. Pause brefly after pushng [PTT].
2. Hold the mcrophone 5 to 10 cm from your mouth, then
speak nto the mcrophone at a normal voce level.
14
: