Conventional Operation; Turning Power On; Channel Selection - Icom IC-F15 Instruction Manual

Uhf/vhf transceiver
Hide thumbs Also See for IC-F15:
Table of Contents

Advertisement

3
I Turning power ON
➥ Rotate [VOL] to turn power ON.
I Channel selection
IC-F15S/F25S:
Toggle [CHANNEL SWITCH] to select
the channel 1 or 2, or, push one of [MR-
CH 1] to [MR-CH 4] key to select a chan-
nel directly.
• The memory channels 3 and 4 are avail-
able when [MR-CH 3] and [MR-CH 4]
keys are assigned.
IC-F15/F25:
Rotate [CHANNEL SELECTOR] to se-
lect the desired operating channel, in se-
quence; or, push one of [MR-CH 1] to
[MR-CH 4] key to select a channel di-
rectly.
AUTOMATIC SCAN TYPE:
Channel setting is not necessary for this type. When turning the
power ON, the transceiver automatically starts scanning. Scanning
stops when receiving a call.
12

CONVENTIONAL OPERATION

[VOL]
[CHANNEL SWITCH]
[CHANNEL
SELECTOR]

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ic-f15sIc-f25Ic-f25s

Table of Contents