HP 1240 Series User Manual page 44

chapter 3
This selects Print Report and then selects Automatic Reports Setup.
3
Press ! to scroll through the following report types:
–
–
–
–
–
–
Note:
any kind of error generated.
4 Press
34
Print Report
1: Automatic Reports Setup
2: Last Transaction
3: Fax Log
4: Speed Dial List
5: Self-Test Report
6: Caller ID Report *
7: Junk Fax Report *
* Not available in all countries/
regions. If Caller ID service is not
supported in your country/
region, this menu item will not
appear in the Print Report menu.
Every Error: prints whenever there is any kind of fax error (default).
Send Error: prints whenever there is a transmission error.
Receive Error: prints whenever there is a receiving error.
Every Fax: confirms every time a fax is sent or received.
Send Only: prints every time a fax is sent.
Off: does not print fax reports.
If you select Send Only, you will also receive error reports if there is
OK to select a report.
Automatic Reports Setup
Every Error
Send Error
Receive Error
Every Fax
Send Only
Off
hp fax 1240 series