Replace The Telephone Cord; Restore Factory Defaults - HP 1240 Series User Manual

Hewlett-packard fax machine user guide
Table of Contents

Advertisement

chapter 6
7
Clean only the contacts. Do not clean the nozzles.
Nozzles - do not clean
8
Place the print cartridge back into the carriage.
9
Repeat if necessary for the other print cartridge.
10
Close the print-carriage access door and plug in the HP Fax.

replace the telephone cord

In some countries/regions you must use a special telephone cord to connect
your device to the telephone system.
Please check

restore factory defaults

You can restore the original factory settings to what they were when you
purchased your HP Fax.
Note:
you set, nor will it affect any changes you made to scan settings and the
language and country/region settings.
You can perform this process from the front panel only.
1
Press Setup.
2
Press 5, then press 3.
This selects Tools and then selects Restore Factory Defaults.
The factory default settings are restored.
72
fax setup
on page 75 to see if this applies to you.
Restoring the factory defaults will not change the date information
Tools Menu
1:Clean Print Cartridge
2:Align Print Cartridge
3:Restore Factory Defaults
4:Reprint Faxes in Memory
Contacts
hp fax 1240 series

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fax 1240 series

Table of Contents