Changing Configuration Settings From The Printer Home Page - Intermec PB31 User Manual

Changing Configuration Settings from the Printer Home Page

PB21 and PB31 Mobile Receipt Printer User Guide
If you are have a printer with an 802.11 wireless radio, you can change
configuration settings from the home page of the printer.
To make changes to the configuration
1 Establish a connection between your printer and the network. For
help see "Setting Up 802.11 Radio Communications" on
page 33.
2 Connect your PC to the same network that the printer is on.
3 Change the printer language to Fingerprint or IPL. For help, see
"Changing the Printer Language" on page
4 If you are using Fingerprint or IPL,
a Press the Setup button .
b Press the
c Press to enter the Network system menu.
d Press until you reach IP address.
e Press to view the IP address.
5 Start a web browser.
6 In the address field, type the IP address of your printer and press
Enter. The home page of the printer appears.
7 Click Login and enter your administrator name and password.
8 On the home page of the printer, click Configuration.
For help with Fingerprint, IPL, ESC/P, or SmartSystems commands
and information, see either the
Reference Manual, the
Reference Manual, the
SmartSystems online help. You can download these documents from
the Intermec website at www.intermec.com.
Chapter 2 — Configuring the PB21 and PB31
until you reach Network.
Intermec Fingerprint Command
Intermec Printer Language (IPL) Command
ESC/P Programmer's Reference Manual
7.
or
43