Changing Configuration Settings From The Printer Home Page - Intermec PB21 User Manual

Chapter 2 — Configuring the PB21 and PB31
Changing Configuration Settings From the Printer Home
Page
44
If your printer uses the Fingerprint language, you use the SETUP
command, followed by the node, subnode, and parameters setting.
Fingerprint automatically sends feedback to the communications
program as you type.
If you want to see what you are typing with IPL, you need to complete
the following procedure.
To see IPL commands as you type
1 From the HyperTerminal menu, select File > Properties > the
Settings tab.
2 Click the ASCII Setup button.
3 Select Echo typed characters locally.
4 Click OK twice.
If you are have a printer with an 802.11 wireless radio, you can change
configuration settings from the home page of the printer.
To make changes to the configuration
1 Establish a connection between your printer and the network. For
help see "Setting Up 802.11 Radio Communications" on
page 35.
2 Connect your PC to the same network that the printer is on.
3 Change the printer language to Fingerprint or IPL. For help, see
"Changing the Printer Language" on page
4 If you are using Fingerprint or IPL,
a Press the Setup button .
b Press the
c Press to enter the Network system menu.
d Press until you reach IP address.
e Press to view the IP address.
5 Start a web browser.
until you reach Network.
PB21 and PB31 Mobile Receipt Printer User's Guide
7.