Transporting The Mower - RHINO AGM52 Operator's Manual

Transporting the Mower

1. Make sure the stand tube is secured in the "up"
position. If not, pull Clip and Pin (R) and slide Stand
Tube (A) up. Secure with Pin (R) and clip.
2. Before folding, check clearance between tractor &
cover frame. Fold back the front cover frame (H) and
cover sheet. Fold front & rear cover under front cover
frame and secure with tarp strap stored under center
of rear cover. Attach to hole in center front cover
frame.
COVER SHEET HAS BEEN REMOVED IN THE PICTURE FOR ILLUSTRATION
PURPOSES ONLY. NEVER OPERATE MOWER IF COVER IS NOT SECURED IN PLACE
AND IN GOOD CONDITION.
SECURE TRANSPORT LOCK BEFORE TRANSPORTING MOWER, OTHERWISE MOWER
HEAD LIFT CYLINDER MAY LEAK DOWN RESULTING IN POSSIBLE INJURY OR DEATH
TO BYSTANDERS.
AGM 52-62-72-82
© 2010 Alamo Group Inc.
OPERATION
10/10 Operation Section.4-40