RHINO AGM52 Operator's Manual page 117

Packing, Transport and Lifting
The machine can be delivered with or without packing.
If it is delivered with packing, mount the curtain.
When the machine is not attached to the tractor, it can be raised by means of a crane, using the pull eye bolt as
shown in the label attached to the machine.
For raising the machine use safety hooks and suitable cables to be
mounted as indicated by labels.
During lifting make sure that the machine is with the cutter bar in the horizontal position.
Alternatively, place the machine on wooden pallets and raise it with a forklift. Lifting of the machine shall be
performed by skilled staff.
AGM 52-62-72-82
© 2010 Alamo Group Inc.
OPERATION
10/10 Operation Section 4-7