RHINO AGM52 Operator's Manual page 100

STEP 15. Insert the free end of the rope cord through hole 1 and hole 2 as shown in the Picture. Secure the end with the
rope-clip (Picture 15.2).
STEP 16. Loosen the disc-holder bolts and insert the conveyor disc that must be in phase with the adjacent disc as shown in
the Picture (Picture 16.2).
Tighten the disc-holder bolts and close the conveyor from the top with the black plastic tap.
AGM 52-62-72-82
© 2010 Alamo Group Inc.
ASSEMBLY
Picture 15.1
Picture 16.1
10/10 Assembly Section 3-10
Picture 15.2
Picture 16.2