RHINO AGM52 Operator's Manual page 156

The stubble is not the same
The forge is pushed forward before
being cut.
AGM 52-62-72-82
© 2010 Alamo Group Inc.
OPERATION
1. The disk carrier bar tilts too much.
2. The knives are over worn.
3. Power takeoff speed is insufficient.
1. The ventilating effect of the knives is
too strong.
10/10 Operation Section 4-46
1. Reduce the tilt of the disk
carrier bar.
2. Replace the knives.
3. Increase power takeoff rotation
speed up to, but not over, 540
revs/min.
1. Reduce power takeoff rotation
speed and increase
forward movement speed.
tractor