RHINO AGM52 Operator's Manual page 154

OPERATION
Use adequately sized and rated trailers and
equipment to transport the tractor and implement.
Consult an authorized dealer to determine the
proper equipment required. Using adequately
sized chains, heavy duty straps, cables and/or
binders, securely tie down both the front and rear
of the tractor utilizing the proper tie down locations
as specified by the tractor manufacturer. OPS-U-
0025
Arrange the chains so that when tightened, the
chains are pulling downward and against
themselves. Carefully tighten the securing chains
or other fasteners using boomers or binders to
apply maximum tension. Use extreme care when
attaching and removing the securing devices as
the extreme tension involved when released has
the potential to inflict serious injury.
While hauling the tractor and implement, make
occasional stops to check that the tractor and
implement have not moved or shifted and that the
securing chains have maintained tension. If during
transport a hard braking, sharp turning, or
swerving action was performed, stop at the next
safe location to inspect the security of the load.
OPS-U- 0026
AGM 52-62-72-82 10/10 Operation Section 4-44
© 2010 Alamo Group Inc.