RHINO AGM52 Operator's Manual page 102

STEP 19. Insert the threaded spindle of the stabilizer in the spring box of the pin of the three point linkage (Picture 19.1) and
close the black plastic tap. Insert 1 thin flat washer Ø25 on the spring pin (Picture 19.1) and the lightening spring (Picture
19.2). Insert 1 thin flat washer Ø25 (Picture 19.3) and lock with 1 pin size =6x50 (Picture 19.3).
Picture 19.1
STEP 20. Insert the flexible hydraulic hose through the support shown in Picture 20.1. Tighten the end section of the flexible
hose to the hydraulic cylinder (Picture 20.2), secure the hose to the cylinder with a strip and connect the quick coupling to the
support device of the machine (Picture 20.3).
Picture 20.1
AGM 52-62-72-82
© 2010 Alamo Group Inc.
ASSEMBLY
Picture 19.2
Picture 20.2
10/10 Assembly Section 3-12
Picture 19.3
Picture 20.3