RHINO AGM52 Operator's Manual page 95

BAG FOR CUTTERS
Description Quantity
SCREW TE M12 FOR CUTTER
FLANGED KNURLED NUT M12
RIGHT CUTTER
LEFT CUTTER
Assembly Steps
STEP 1. Remove protection foil from the case and remove the components manually (bars, windrower, curtain, carter, discs
etc.).
STEP 2. Use hoist gear or chain hoist to remove the three point. Hoist gear or chain hoist must be hooked at the anchorage
point as shown in the Picture.
AGM 52-62-72-82
© 2010 Alamo Group Inc.
ASSEMBLY
AGM52 AGM62
10 12
10 12
6 6
4 6
10/10 Assembly Section 3-5
AGM72 AGM82
14 16
14 16
8 8
6 8