Mower Storage; Transporting The Tractor And Implement - RHINO AGM52 Operator's Manual

Mower Storage

Properly preparing and storing the mower at the end of the season is critical to maintaining its appearance and to help
ensure years of dependable service. The following are suggested storage procedures:
• Thoroughly clean all debris off the mower to
prevent damage from rotting grass and
standing water.
• Lubricate all mower grease points and fill
gearbox oil levels as
maintenance section.
• Tighten all bolts and
recommended torque.
• Check the mower for worn and damaged
parts. Perform repairs and make replacements
immediately so that the mower will be ready
for use at the start of the next season.
• Store the mower in a clean, dry place with
the mower housing resting securely on blocks
or at ground level.
• Keep the driveline yoke from sitting in water,
dirt and other contaminants.
• Use spray touch-up enamel where necessary
to prevent rust and maintain the appearance
of the mower. OPS-R-0032_D
Never allow children or other persons to ride on the Tractor or
Implement. Falling off can result in serious injury or death.
\

Transporting the Tractor and Implement

Inherent hazards of operating the tractor and implement and the possibility of accidents are not left behind when you
finish working in an area. Therefore, the operator must employ good judgement and safe operation practices when
transporting the tractor and implement between locations. By using good judgement and following safe transport
procedures, the possibility of accidents while moving between locations can be substantially minimized. OPS-U- 0017
AGM 52-62-72-82
© 2010 Alamo Group Inc.
OPERATION
detailed in the
pins to the
10/10 Operation Section 4-39
(SG-10)