RHINO AGM52 Operator's Manual page 98

STEP 9. Connect the blade with the lever to the pin of the three point: insert the 1
nd
2 shim (Picture 9.1). Insert the 3
plunger size=8x50 (Picture 9.4).
Picture 9.1
Picture 9.3
STEP 10. Mount the safety release device, insert the 25 mm pin (Picture 10.1) and lock it with 2 pins size=6x50 (Picture 10.2).
Lock the safety release device from the top with 1 pin size=8x50 (Picture 10.3).
Picture 10.1
STEP 11. Insert the black square plastic tap on the stand (Picture 11.1). Insert the stand on the pin on the frame bush, insert
1 flat washer Ø 25 and 1 8mm automatic pin (Picture 11.2).
AGM 52-62-72-82
© 2010 Alamo Group Inc.
ASSEMBLY
rd
shim (Picture 9.2), the hydraulic cylinder (Picture 9.3), n° 2 washers and lock with 1 spring
Picture 10.2
Picture 11.1
10/10 Assembly Section3-8
st
shim, the blade with the lever and then the
Picture 9.2
Picture 9.4
Picture 10.3
Picture 11.2