Kodak 2400 DV Plus User Manual page 59

5-4
5. Insert the new projection lamp so that the mark on its base is facing
upwards. Make sure that the new projection lamp is inserted
securely so there is no gap between the projection lamp and the
lamp socket.
CAUTION: Do not touch the reflector mirror surface of the
projection lamp. Fingerprints, smudges or debris
should be wiped clean with a soft, dry cloth.
6. Insert the projection lamp all the way into the lamp holder.
7. Slide the projection lamp unit securely back into place.
NOTE: If the projection unit is not properly installed, power will not
be supplied and the scanner will not operate.
8. Turn the power switch on.
Mark
A-61316 April 2010