Using Centering And Fit - Kodak 2400 DV Plus User Manual

Using Centering and Fit

3-12
Clearing a defined print area
• Press the Vertical and Horizontal Clear keys to clear the defined
print area.
Selecting Masking
• Press the (manual) Masking key when you want to mask a specific
area of an image.
NOTE: The basic operation for Manual Masking is similar to Trimming.
Refer to the previous procedures on Trimming and defining
areas for Manual Masking.
Once the image on the screen has been manually trimmed or auto
masked, the Image Centering function moves the image to the center of
the print. The Fit function however, fits the image on the screen onto the
entire surface of the print.
Screen Image
Centering
Fit
Centering
• Press the Centering/Fit key to turn on Centering and press the Start
key.
NOTE: Centering/Fit mode cannot be used if Masking is selected.
Fit
• Press the Centering/Fit key to turn on Fit and press the Start key.
NOTE: Fit mode cannot be used when the scanner is connected to the
PC.
Print Image
Centering Off Centering
On
Fit Off Fit On
A-61316 April 2010