Turning The Power On And Off - Kodak 2400 DV Plus User Manual

Turning the power on
and off
A-61316 April 2010
To turn the power on:
1. Press the power switch of the scanner to the (I) On position.
2. Press the power switch of the printer to the (I) On position.
3. The control panel displays a blinking "1" and the scanner starts to
warm up. The scanner is ready to read data when the "1" stops
blinking.
NOTE: If you load the film in the film carrier and press Start while
the printer is warming up, you can scan and memorize the
film image of about 9 pages (letter or A4 size/400 dpi). The
printer allows that print process to be started as soon as the
printer completes warming up.
Both ends of the Exposure display blink. If you want this
function disabled, contact your Kodak Service
Representative.
1-9