Kodak 2400 DV Plus User Manual page 3

Digital scanner
Hide thumbs Also See for 2400 DV Plus:
Table of Contents

Advertisement

• Do not use this product in an area where ammonia or other gases or chemicals are present.
• Do not use this product in an environment with a temperature outside the range specified in the User's Guide.
• Do not attempt to feed stapled paper, carbon paper or aluminum foil through this product.
• Do not touch or scratch the surface of the toner unit developing roller and the PC drum.
• Use only the recommended supplies and consumables.
Safety rules
• The unit should be kept free from moisture, dirt, dust and exposure to heat and direct sunlight at all times.
• Keep hands, hair and clothing away from rollers and other moving parts.
• Be sure the scanner is OFF before removing the Projection Lamp Unit.
• Be sure that the proper voltage is used and that the machine is well grounded. The use of electrical extension cords is
strongly discouraged.
• For best performance, use the recommended supplies and consumables with this unit.
• Do not attempt to remove any cover that is secured.
FCC Part 15 - Radio Frequency Devices (For U.S.A. Users)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
• This device may not cause harmful interference, and this device must accept any interference received, including
interference that may cause undesired operation.
WARNING
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
The design and production of this unit conforms to FCC regulations, and any changes or modifications must be registered with
the FCC and are subject to FCC control. Any changes made by the purchaser or user without first contacting the manufacturer
will be subject to penalty under FCC regulations.
Interference-Causing Equipment Standard (ICES-003 ISSUE 4) (For Canada Users)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
CE Marking (Declaration of Conformity) (For European Users)
This product complies with the following EU directives:
2006/95/EC and 2004/108/EC directives.
This declaration is valid for the area of the European Union (EU) only.
This device must be used with shielded interface cable and shielded network cable.
The use of non-shielded cable is likely to result in interference with radio communications and is prohibited under rules.
Acoustic Noise
Machine Noise Regulation 3 GSGV, 18.01.1991: The sound pressure level at the operator position according to EN27779 is
equal to or less than 70dB (A).
European Union
This symbol indicates that when the last user wishes to discard this product, it must be sent to appropriate
facilities for recovery and recycling. Please contact your local Kodak representative or refer to
www.kodak.com/go/recycle for additional information on the collection and recovery programs available for
this product.
ii
A-61316 April 2010

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents