Table of Contents
Advertisement
6-16
The following table illustrates how the use of a string of scanner-
unique commands can temporarily override current mode
parameters:
ACTION
Scanner is in Mode 1
Host executes SCSI Send command
with 2FX300BX
Host executes SCSI Send command
with 4HA
Host executes SCSI Send command
with 1HA
*Parameter default value.
Permanently changing individual parameters
A permanent change to an individual parameter is performed by
temporarily overriding a single parameter and then sending a
scanner-unique Define Mode (JA) command to save the values to
a specified mode.**
The following table illustrates how the use of a scanner-unique JA
command can be used to permanently change a current mode
parameter:
ACTION
Scanner is in Mode 1
Host executes SCSI Send command
with 2FX
Host executes SCSI Send command
with 4JA
Host executes SCSI Send command
with 4HA
Host executes SCSI Send command
with 1HA
* Parameter default value.
** The value(s) may be saved to the current mode or any of the
other modes.
RESULT
Compression
Resolution
3*
200*
2
300
3*
200*
3*
200*
RESULT
Compression
Resolution
3*
200*
2
200*
2
300
3*
200*
A-61124 March 1999
Advertisement
Table of Contents
