Field - Kodak Document Scanner 9500 with Image Manager Integrator Manual

KX/Y/Z — Scan contrast
LX/Y/Z — Dither pattern
(screen)
MC — Count Only mode
A-61124 March 1999
The KX/Y/Z command defines the contrast used for the current
mode.
NOTE: A contrast of 0 results in a fixed threshold.
Data Field
cont
Data Field
cont scan contrast ranging from 0 (fixed
thresholding) to 100 (fully adaptive)
NOTES:
• Leading zeros are not permitted.
• If multi-level screening is enabled (LX/Y/Z ≠ 0), this command is
used to enable/disable Error Diffusion.
The LX/Y/Z command selects one of the eight screens for the
current mode.
Data Field
screen
Data Field
screen 2-level screen (no screen)
16-level screen
32-level screen
64-level screen
3-level screen
4-level Bayer Dither
16-level Bayer Dither
64-level Bayer Dither
NOTE: Level is defined as the levels of gray simulated by the
screen.
The MC command enables or disables Count Only operation. The
image address does not change and no images are stored when
using Count Only mode.
Data Field
stat
Data Field
stat disables Count Only mode
enables Count Only mode
Command Field
K
Description
Command Field
L
Description
Command Field
M
Description
X/Y/Z
Value(s)
0–100
X/Y/Z
Value(s)
0
1
2
3
4
5
6
7
C
Value(s)
0
1
6-11