Field - Kodak Document Scanner 9500 with Image Manager Integrator Manual

JX/Y/Z — Scan threshold
6-10
JA command Example 2:
• Mode 4 is the current application mode.
• The host executes the following FX command to disable
compression:
HEX 30
CHAR 0
• The host executes a JA command, specifying Mode 3:
HEX 33
CHAR 3
When Mode 3 is selected from the scanner operator control panel,
all of the features of Mode 4 that were available prior to the
execution of the FX command described above remain
unchanged, except compression (which is now disabled); these
values are assigned to Mode 3.
The Mode 3 definition has been overwritten by execution of this
command. When the operator selects Mode 4 again, all of the
features of Mode 4 that were available prior to the execution of
the FX command described above remain unchanged.
The JX/Y/Z command defines the threshold used for the current
mode.
Data Field
thresh
Data Field
thresh scan threshold ranging from 0
(lightest) to 255 (darkest)
NOTE: Leading zeros are not permitted.
46
F
4A
J
Command Field
J
Description
58
X
41
A
X/Y/Z
Value(s)
0 to 255
A-61124 March 1999