Kodak Document Scanner 9500 with Image Manager Integrator Manual page 42

Using the Send
command for scanner-
unique commands
5-26
Scanner-unique commands may be sent to the scanner during the
Data Transfer phase of a SCSI Send command.
IMPORTANT: The Transfer Type field must be set to 80H.
The following tables illustrate how a scanner-unique DA command
with a data field of 345.6 would be sent:
Command block
Byte
Number
0 Operation Code = Send
1 Logical Unit Number = 1 and Reserved = 0
2 Transfer Type = Scanner-Unique
Command
3 Reserved = 0
4 Transfer Identification (MSB) = not used
5 Transfer Identification (LSB) = not used
6 Transfer Length (MSB) = 0
7 Transfer Length = 0
8 Transfer Length (LSB) = 7
9 Vendor Unique, Reserved, Flag, Link = 0
Information sent during Data Transfer phase:
Byte
Number
0 Scanner-unique Data Field = 3
1 Scanner-unique Data Field = 4
2 Scanner-unique Data Field = 5
3 Scanner-unique Data Field = .
4 Scanner-unique Data Field = 6
5 Scanner-unique Command Field = D
6 Scanner-unique Command Field = A
7 Transfer Length (MSB) = 0
Description
Description
Hexadecimal
Value
2AH
20H
80H
00H
00H
00H
00H
00H
07H
00H
Hexadecimal
Value
33H
34H
35H
2EH
36H
44H
41H
00H
A-61124 March 1999