Table of Contents
Advertisement
Scanner-unique
command samples
A-61124 March 1999
There are several ways to alter the default image processing
parameters:
• temporarily override an individual parameter
• temporarily override a group of parameters
• permanently change an individual parameter
• permanently change a group of parameters
Temporary individual parameter overrides are performed by
sending a single scanner-unique command using a single SCSI
Send command. The temporary parameter change remains in
effect until one of the following occurs:
• a new value for the same parameter is sent
• the parameter value(s) are saved to a mode
• change to another mode
• a SCSI or power-on reset occurs
The following table illustrates how the use of a single scanner-
unique command can temporarily override a current mode
parameter:
ACTION
Scanner is in Mode 1
Host executes SCSI Send
command with 2FX
Host executes SCSI Send
command with 4HA
Host executes SCSI Send
command with 1HA
*Parameter default value.
Temporarily overriding a group of parameters
Temporary group parameter overrides are performed by sending
a string of scanner-unique commands using a single SCSI Send
command. The temporary parameter changes remain in effect
until one of the following occurs:
• an individual parameter value is sent (changing only that
parameter value)
• the parameter value(s) is saved to a mode, or you change to
another mode
• a SCSI or power-on reset occurs
RESULT
Compression
Resolution
3*
200*
2
200*
3*
200*
3*
200*
6-15
Advertisement
Table of Contents
