Field - Kodak Document Scanner 9500 with Image Manager Integrator Manual

SX/Y/Z — Reverse image
TX — Simplex/duplex
status
A-61124 March 1999
The SX/Y/Z command changes the white/black polarity for
the current mode.
Data Field
rev
Data Field
rev white/0
white/1
The TX command directs a duplex scanner to scan either
one or both sides of the document(s) for the current mode.
Data Field
side
Data Field
side transmits only one side
(simplex/front only)
transmits two sides (duplex/front and
rear)
NOTE: Defaults to hardware configuration (simplex machine
defaults to single-sided; duplex machine defaults to
double-sided).
Command Field
Description
black/1
black/0
Command Field
Description
S X/Y/Z
Value(s)
0
1
T X
Value(s)
1
2
6-13