Configuration Problems
If your PC Workstation boots normally, but you are having problems
configuring different parts of your PC Workstation.
Symptom
PC Workstation starts to boot, but a POST (Power-
On Self-Test) error message is displayed on the
screen.
You cannot turn off the PC Workstation.
Your PC Workstation has a software problem.
Your PC Workstation repeatedly loses its configuration settings.
You have problems using the Euro Symbol
Type of Problem
•
CMOS test error.
•
Keyboard or mouse are not working correctly.
•
Floppy disk drive LED does not appear.
•
Hard disk drive, DVD, CD-RW or CD-ROM drive are
not accessible.
•
Serial or Parallel ports are incorrectly configured.
•
Devices are not cabled correctly.
•
Device drivers missing or incorrectly installed.
•
Software application will not run.
•
Date and time are wrong.
Refer to page 19.
Refer to page 20.
Refer to page 21.
Refer to page 22.
Refer to page 23.
Refer to page 24.
Refer to page 25.
Refer to page 26.
Refer to page 27.