HP KAYAK XM600 Troubleshooting Manual page 11

Symptom...
Dual monitor or multi-monitor configuration problem
One monitor is blank.
NOTE
Check that...
If you have a dual monitor video card
installed, but only one monitor, check that
it is connected to Output 1.
If you have two or more video cards
installed, but only one monitor, check that
the monitor is connected to the correct
output.
Multi-monitor configuration and resolution
have been correctly defined.
If the monitor goes blank or becomes corrupt during a Windows boot, refer to "Case 5
— Screen Goes Blank or Corrupt Image" on page 16.
How...
•
The outputs are labelled on the video card.
•
Plug the monitor in the video output on the second video
card.
1 Access Display Properties through Start, Settings,
Control Panel.
2 Select the multi-monitor option and configure for the required
number of monitors and resolution.
NOTE
For the Matrox G400 dual monitor graphics card, the
multi-monitor setting is only available if both monitors are
connected to the PC and switched on before the PC is
switched on.
Case 2 — Monitor Is Blank
11