HP KAYAK XM600 Troubleshooting Manual page 41

Running e-DiagTools from the HP "Recovery" CD-ROM
To run e-DiagTools from the recovery CD-ROM:
1 Insert the HP CD-ROM in your CD-ROM drive. Shut down the
operating system and restart your computer.
2 Ensure that the option to start from the CD-ROM drive is enabled,
and that the CD-ROM is configured to be the first device to boot
from.
3 e-DiagTools will start automatically, or, depending on the HP
CD-ROM used, a menu appears. In this last case, select the option to
run the hardware diagnostics.
e-DiagTools will start, displaying a welcome screen.
Running e-DiagTools from the HP DiagTools CD-ROM
To run e-DiagTools from the HP DiagTools CD-ROM, follow this
procedure:
1 Insert the HP DiagTools CD-ROM in your CD-ROM drive. Shut down
the operating system and restart your computer.
2 Ensure that the option to start from the CD-ROM drive is enabled
and that the CD-ROM is configured to be the first device to boot
from.
3 The programs on the CD-ROM will automatically determine the
appropriate version of e-DiagTools to run.
e-DiagTools will start, displaying a welcome screen.
Troubleshooting with HP e-DiagTools
Running e-DiagTools from a CD-ROM
41