HP KAYAK XM600 Troubleshooting Manual page 45

Hewlett-packard personal computer user manual
Hide thumbs Also See for KAYAK XM600:
Table of Contents

Advertisement

NOTE
Recovering Hard Disk Drive Contents
In the unlikely event of a hard disk crash, you can recover your PC
Workstation's preloaded operating system and software using the PC
Image Engineer — Image Creation and Recovery CD-ROM
supplied with your PC Workstation. Some of the available functions on
the Image Creation and Recovery CD-ROM are described below:
Full Recovery: Restores the operating system, drivers, utilities and
Special Disk Partition as supplied by default. A full recovery also
automatically erases any viruses that might be present on the Master
Boot Record. It should be noted, however, that this function
reformats your hard disk drive. It is highly recommended, if possible,
that you save all data files and software installations.
Minimal Recovery: Restores only the operating system and SCSI
driver for access to a SCSI hard disk drive.
Partial Recovery: Restores individual drivers which are supplied in a
"browseable area" of the CD-ROM.
Copy OS Master Files: For use when Windows prompts you to insert
the operating system media when installing additional drivers.
HP e-DiagTools: Checks the system configuration and operation.
Also described on page 37.
Any software that has been installed on the PC Workstation after it has been
purchased, and any personal data that has been generated by applications installed on
the PC Workstation, are not covered by the recovery process.
When using the Full Recovery option, any hardware that has been installed in the PC
Workstation after it has been purchased will require that the necessary drivers be re-
installed. In the case where hardware has been removed you may have to remove the
unneccessary drivers.
Refer to your Kayak User's Guide delivered with the PC Workstation for
instructions on how to perform a recovery, upgrade or downgrade.
1. Some models are not provided with an Image Creation & Recovery
CD-ROM. If you do not have an Image Creation and Recovery CD-ROM,
reinstall the operating system from the CD-ROM provided for this purpose
with your PC Workstation.
Any drivers you need to reinstall can be downloaded from HP's Support
Web site at: www.hp.com/go/kayaksupport.
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xm600 - kayak - 128 mb ram

Table of Contents