HP KAYAK XM600 Troubleshooting Manual page 40

NOTE
Troubleshooting with HP e-DiagTools
Running e-DiagTools from a CD-ROM
Running e-DiagTools from a CD-ROM
Only the Utility Partition version of e-DiagTools supports the full range
of e-features. When you run e-DiagTools from a CD-ROM you will not be
able to send the Support Ticket via e-mail or to update the BIOS.
Prerequisites
Before you run e-DiagTools from a CD-ROM, ensure that the following
are correctly configured in the computer's BIOS Setup program:
No operating system is specified, which means that:
if the or
•
Main
set it to
No
if the or
•
Main
system, set it to
All
Hardware Protection
or
Enabled Unlocked
If you are running e-DiagTools from a CD-ROM, the option to start
from the CD-ROM is enabled and the CD-ROM is configured to be the
first device to boot from.
Alternatively, you can set the boot device priority by pressing the F8
key when the logo screen is displayed after restarting your
computer.
After running e-DiagTools, restore the original Setup values.
40
menu has an item
Advanced
menu has an item to select the operating
Advanced
.
Other
items in the
.
Plug and Play OS
menu are set to
Security
,