To Cancel The Timer; Power Outage - GE JKP16 Use & Care Manual

OVEN CONTROL, CLOCK AND TMER
The clock must be set for the automatic oven timing
functions to work properly. The time of day cannot be
changed during a Timed Baking or Self-Cleaning cycle.
Timer
The timer is a minute timer; it does
not control oven operations. The
maximum setting on the timer is 9
hours and 55 minutes.
To Reset the Timer
If "TIMER" is displayed, press the INCREASE or
DECREASE pad until desired time is reached.
If "TIMER" is not displayed, press the TIMER
ON/OFF pad first, then follow the instructions above
to set the timer.
v
The end of cycle tone is a series of three beeps
followed by one beep every six seconds until you
press any operation. If you would like to eliminate the
repeating beeps, press and hold the CLEAR/OFF pad
o return the end of cycle tone to the repeating beeps,
press and hold the CLEAR/OFF pad for 10 seconds.
To Set the Clock
CLOCK
3. Press the CLOCK pad to start.
To Set the Timer
1. Press the TIMER
ON/OFF pad.
TIMER
ON/OFF
2. Press the
DECREASE pad to
set the amount of
time on the timer.

To Cancel the Timer

Press find hold the TIMER ON/OFF pad until the
word "TIMER" disappears from the display.
Power
After a power outage, when power is restored. the
display will flash and time shown will no longer be
correct-for example, after a 5-minute power
interruption the clock will be 5 minutes slow.
functions that were in operation when the power went
out will have to be programmed a&ain.
2. Press the INCREASE or DECREASE
pad to set the time of day.
The timer will start automatically
within a few seconds of releasing the
timer, as you are setting it, will display
seconds until one minute is reached.
Then it will display minutes and
seconds until 60 minutes is reached.
After 60 minutes, it will display hours
minutes until the maximum time of
9 hours and 55 minutes is reached.
Outage