Display Messages - GE JKP16 Use & Care Manual

OVEN CONTROL, CLOCK AND TMER

Display Messages

Programmed information can be displayed at any time
by pressing the pad of the operation you want to see.
For example, you can display the current time of day
while the timer is counting down by pressing the
CLOCK pad. Press the TIMER ON/OFF pad to return
to the timer display.
To check the start time for delayed Bake or
Self-Clean, press and hold COOK TIME or AUTO
SELF CLEAN pad for 3 seconds. The display will
show the bake or clean start time for as long as you
press the pad. When you release the pad, the display
will return to the time of day.
INCREASE and DECREASE Pad Speed
You can change the speed of the INCREASE and
DECREASE pads.
While the oven is off and the time of day shows
in the display, press and hold the INCREASE and
DECREASE pads and the TIMER ON/OFF pad at
the same time for about 2 or 3 seconds.
A number from 1 to 5 will replace "0:00" in the
display. The slowest is 1 and the fastest is 5. Use
the INCREASE or DECREASE pad to change the
number, then press the CLEAWOFF pad to return to
the time of day display.
Child I.ockout Feature
Your built-in oven has a provision for locking the
oven control to prevent the oven from being turned
on accidentally.
To lock the oven control, press and hold the
TIME pad at the same time for two seconds. The
word "OFF" will appear and then disappear in the
display and the oven control will be locked. During
lockout, the word "OFF" will appear momentarily
each time a cooking function pad is pressed.
To unlock the oven control, repeat the above
procedure. The word "OFF" will appear in the
display and then disappear after two seconds.
8
(continued)
If "clean" appears in the display, DOOR flashes
and the oven control signals, you set the self-clean
cycle and did not shut the door.
If "LOCK" only appears in the display, the oven
door is in the locked position. BAKE, BROIL and
COOK TIME cannot be set if the door is in the
locked position.