Control Panel - GE JKP16 Use & Care Manual

Offset Shelf
The offset shelf provides
more cooking space
between itself and the
shelf above it. This
allows more flexibility
when placing foods in
the oven. See the Multi-
Shelf Baking section.
The offset shelf can be placed at any shelf position.
CAUTION: When you are using the offset shelf
in the lowest position (A), you will need to use
caution when pulling the shelf out. We recommend
that you pull the shelf out several inches and then,
using two pot holders, pull the shelf out by holding
the sides of it. The offset shelf is low and you could
be burned if you place your hand in the middle of the
shelf and pull all the way out.
Shelf Positions
The oven has 4 shelf supports identified in this
illustration as A (bottom), B, C and D (top).
Shelf positions are suggested in the Baking, Roasting
and Broiling sections.
Oven Light
The light comes on automatically when the door
is opened.
Use the pad on the control panel to turn the light on
and off when the door is closed.
USING YOUR OVEN
(continued)
To remove the shelf,
pull it forward to the
stop-locks and lift the
front of the shelf.
To replace the shelf,
tilt the shelf up at the
front and slide the curved
extension of the shelf
under the stop-locks on
the shelf supports. Then
slide the shelf all the way
into the oven.
OVEN
LIGHT
x\ \