Sntp; System Log - Planet FGSD-1022P User Manual

4.2.10 SNTP

It provides the functions allowing the user to update the switch firmware via the Trivial File Transfer Protocol (TFTP)
server. Before updating, make sure the TFTP server is ready and the firmware image is located on the TFTP server.
The page includes the following fields:
Object
SNTP
SNTP server IP
UTC Type
Time Range (0~24)
Time
Apply
Help

4.2.11 System Log

The System Log setting page allows you to configure the logging of error message to switch, such as port link down or link
up. You can also limit the event messages sent to only those messages below a specified level. The web screen as Figure
4-2-21 appear.
Figure 4-2-20: SNTP Setting Screenshot
Description
Provide Disable or enable SNTP function.
Provide inputting the SNTP server IP address.
Provide "Before-UTC" and "After-UTC" options for UTV Type.
Provide input the time range and the available range is 0 to 24.
Provide SNTP Time display.
Press this button to take affect.
Press this button for SNTP Setting information.
User's Manual of FGSD-1022 Series
59