Planet FGSD-1022P User Manual page 128

 Binding
Let device that has specific IP address and MAC address can use network. We can set specific IP address, MAC address,
VLAN id and port id to bind, and device can cross switch if all conditions match.
Use binding function; we should enable it first in following page.
In ※Packet Type / Binding box should select ※Binding.
Object
Group ID
Action
VLAN
Packet Type
MAC Address
IP Address
Port Id
Current List
Description
1 ~ 220 (max. 220 ACL group)
Permit / Deny.
 Permit: Permit packet cross switch.
 Deny: Drop packet.
Any / VID.
 Any: Any Vlan id.
 VID: 1~4094. A certain vlan id.
IPv4 / Non-IPv4 / Binding
 IPv4: Set Ipv4 packet field.
 Non-IPv4: Set non-Ipv4 packet field.
 Binding: Set binding entry.
**:**:**:**:**:**
* is represent a digit from 0~9 and A~F,
*** is range from 0 to FF.
***.***.***.***
* is represent a digit from 0~9,
*** is range from 0 to 255.
Source port id, from 1~10.
You create ACL and Binding groups.
128
User's Manual of FGSD-1022 Series
Default Vaule
Permit
Any
IPv4
00:11:22:33:44:55
0.0.0.0
1