Planet FGSD-1022P User Manual page 62

8-port 10/100mbps + 2 gigabit tp/sfp layer managed switch | 8-port 10/100mbps + 2 gigabit tp/sfp managed poe switch | 8-port 10/100mbps + 2 gigabit tp/sfp combo managed 802.3at poe switch
Hide thumbs Also See for FGSD-1022P:
Table of Contents

Advertisement

Speed
Duplex
Flow Control
Rate Control:
(Unit: 128KBbps)
Security:
BSF:
Jumbo Frame:
The three models support up to 9Kbytes jumbo frame forwarding.
It is available for selecting when the Negotiation column is set as Force. When
the Negotiation column is set as Auto, this column is read-only.
It is available for selecting when the Negotiation column is set as Force. When
the Negotiation column is set as Auto, this column is read-only.
Whether or not the receiving node sends feedback to the sending node is
determined by this item. When enabled, once the device exceeds the input data
rate of another device, the receiving device will send a PAUSE frame which halts
the transmission of the sender for a specified period of time. When disabled, the
receiving device will drop the packet if too much to process.
Port-1 ~ Port-24, supports by-port ingress and egress rate control.
For example, assume port 1 is 10Mbps, users can set its effective egress rate at
1Mbps and ingress rate at 500Kbps. Device will perform flow control or
backpressure to confine the ingress rate to meet the specified rate.
Ingress: Type the port effective ingress rate.
The valid range is
0: disable rate control.
1 ~ 8000: valid rate value
Egress: Type the port effective egress rate.
The valid range is
0: disable rate control.
1 ~8000: valid rate value.
A port in security mode will be "locked" without permission of address learning.
Only the incoming packets with SMAC already existing in the address table can
be forwarded normally.
User can disable the port from learning any new MAC addresses, then use the
static MAC addresses screen to define a list of MAC addresses that can use the
secure port. Enter the settings, then click Apply button to change on this page.
User can disable/Enable port broadcast storm filtering option by port.
The filter mode and filter packets type can be select in Switch Setting >
page.
Config
User can disable/Enable port jumbo frame option by port. When port jumbo
frame is enable, the port forward jumbo frame packet.
62
User's Manual of FGSD-1022 Series
8000. The unit is 128K.
0 ~
8000. The unit is 128K.
0 ~
Misc

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fgsd-1022Fgsd-1022hp

Table of Contents