Example:
Switch(config)# poe maximum-power 10 1
Switch(config)# show poe status 1
Port
Admin
Oper
Port1
Enable
on
poe maximum-power
Description:
Enable per port power output limit
The command is configurable while "poe limit-mode" is set to "Total-Limit"
Command Level:
Global Configuration
Syntax:
poe maximum-power <0~308> [<port-list>]
Parameters:
<0~308> <802.af>power limit range from 0~15.4, <802.at>power limit range from 0~30.8, the set value must multiple of
10 (FGSD-1022HP only)
<port-list> specifies the ports to be set. If not entered, all ports are set.
1. This PoE maximum-power command has included in FGSD-1022HP only.
Example:
Switch(config)# poe maximum-power 100 1
Switch (config)# show poe status 1
Port
Admin
Port1
Enable
Power
Priority
Power Limit[W]
Mode
802.3at
Low
Power
Oper
Priority
mode
on
802.3af
Low
User's Manual of FGSD-1022 Series
Current Consumption
[W]
00
10
Power
Consumption [W] Current[mA]
Limit[W]
10
210
Current[mA]
Device Class
0
Device
Class
00
0