Planet FGSD-1022P User Manual page 41

8-port 10/100mbps + 2 gigabit tp/sfp layer managed switch | 8-port 10/100mbps + 2 gigabit tp/sfp managed poe switch | 8-port 10/100mbps + 2 gigabit tp/sfp combo managed 802.3at poe switch
Hide thumbs Also See for FGSD-1022P:
Table of Contents

Advertisement

Mode
Broadcast Storm Filter
Packets Select
Collision Retry Forever
Hash Algorithm
IP/MAC Binding
802.1x protocol
Apply button
individual ports. The threshold is the percentage of the port's total bandwidth
used by broadcast traffic. When broadcast traffic for a port rises above the
threshold you set, broadcast storm control becomes active.
The valid threshold values are 1/2, 1/4, 1/8, 1/16 and OFF.
Default is "OFF".
To select broadcast storm Filter Packets type. If no packets type by selected,
mean can not filter any packets .The Broadcast Storm Filter Mode will show OFF.
The selectable items as below:
Broadcast Packets
IP Multicast
Control Packets
Flooded Unicast / Multicast Packets
Provide Collision Retry Forever function"Disable" or 16, 32, 48 collision numbers
on Managed Switch. If this function is disabled, when a packet meet a collision,
the Managed Switch will retry 6 times before discard the packets. Otherwise, the
Managed Switch will retry until the packet is successfully sent.
Default value is 16.
Provide MAC address table Hashing setting on Managed Switch; available
options are CRC Hash and Direct Map.
Default mode is CRC-Hash.
Enable / disable IP MAC Binding function.
Enable / disable 802.1x protocols function.
Press the button to complete the configuration.
41
User's Manual of FGSD-1022 Series

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fgsd-1022Fgsd-1022hp

Table of Contents