Planet FGSD-1022P User Manual page 21

FGSD-1022HP LED indication

System
LED Color
PWR Green

Per 10/100Base-TX, PoE interfaces (Port-1 to Por-8)
LED Color
LNK/ACT
Green
PoE In-Use
Orange

Per 10/100/1000Base-T port /SFP interfaces
LED Color
LNK/ACT 1000 Green
LNK/ACT 10/100 Orange
1. Press the RESET button
2. Press the RESET button for about
entire configuration will be erased.
3. The 2 Gigabit TP/SFP combo ports are shared with port 9/10 of FGSD-1022 / FGSD-1022P /
FGSD-1022HP. Either of them can operate at the same time.
Figure 2-6: FGSD-1022HP LED panel
Lights to indicate that the Switch has power.
Lights: To indicate the link through that port is successfully established.
Blink: To indicate that the Switch is actively sending or receiving data over that port.
Lights: To indicate the port is providing 48VDC in-line power.
To indicate the connected device is not a PoE Powered Device (PD).
Off:
Lit: indicate that the port is operating at 1000Mbps.
Off: indicate that the port is operating at 10Mbps or 100Mbps.
Blink: indicate that the Switch is actively sending or receiving data over that port.
Lit: indicate that the port is operating at 10/100Mbps.
Off: indicate that the port is operating at 1000Mbps.
Blink: indicate that the Switch is actively sending or receiving data over that port.
seconds. The Switch will reboot automatically.
1-3
10
User's Manual of FGSD-1022 Series
Function
Function
Function
seconds. The Switch will back to the factory default mode; the
21