Per Port Priority - Planet FGSD-1022P User Manual

[<highest-weight>][<sechighweight>][<sec low -weight>] [<lowest-weight>]
e.g. qos priority weighted-round-robin 8,4,2,1
qos level
Description:
Set priority levels to highest, second-high, second-low and lowest.
Syntax:
qos level < highest | second-high | second-low | lowest > <level-list>
Parameters:
<level-list> specifies the priority levels to be high or low.
Level must be
between 1 and 7.
e.g. qos level highest 7
e.g. qos level lowest 4
show qos
Description:
Show QoS configurations, including802.1p priority, priority level.
e.g.
Switch(config)# show qos
QoS configurations:
QoS mode: weighted round robin
Highest weight: 8
Second High weight: 4
Second Low weight: 2
Lowest weight: 1
802.1p priority[0-7]:
Lowest Lowest

6.10.2 Per Port Priority

port priority
Description:
Set port priority.
Syntax:
port priority <disable | [0-7]> [<port-list>]
Parameters:
<port-list> specifies the ports to be set. If not entered, all ports are set.
e.g. port priority disable 1-5
SecLow SecLow SecHigh
User's Manual of FGSD-1022 Series
SecHigh Highest Highest
178