Cisco 7750 Operating Manual page 29

Hewlett-packard network router installation guide

Chapter 5

Operating the Cisco ICS 7750

78-14165-03

Copy and paste the output from the show startup-config command into a text

file where you stored your backup files:

Choose Start > Run.

–

Enter the following command to open Notepad:

–

notepad.exe

Select and copy the startup-config output from the Telnet console, and

–

paste it into the Notepad window.

Do not include the

Note

output. Select the contents from the Telnet console, and copy

them to the clipboard. Go to the Notepad window, and paste the

clipboard contents.

is displayed at the bottom of the Telnet console, press the

– More–

space bar to display the next screen. Copy from the Telnet console again,

and paste to the Notepad window. Repeat until the entire startup

configuration has been displayed, copied, and pasted.

–

From Notepad, choose File > Save.

Save the startup-config file under the Shared Pathname you entered in

–

Step 3d in the

"Using Backup Now" section on page 5-27

\\hostname\sharename\path). Name the config file in this format:

<backupname>_<hostname>, where backupname comes from the

Backup Name in Step 3a in the

lines if they are displayed in the

– More –

"Using Backup Now" section on

Cisco ICS 7750 Installation and Configuration Guide

Backing Up System Data

(for example,

5-29

Ics 7750