Advertisement
Accessing the System
Accessing Cisco CallManager
Step 1
Step 2
Step 3
Step 4
Note
Accessing SPE310s
Cisco ICS 7750 Installation and Configuration Guide
5-8
You can install Cisco CallManager on SPE310s and use the software to configure
call admission control, route plans, voice gateways (such as MRPs or ASIs with
installed voice interface cards [VICs] or voice WAN interface cards [VWICs]),
Cisco IP Phones, and other features associated with transmitting voice traffic over
an IP network.
To access Cisco CallManager on the Cisco ICS 7750, follow these steps:
Click the Configure tab on the ICS System Manager home page.
Click Applications.
The page refreshes, displaying a table that contains information about the
SPE310s and the applications that are running on them.
Click the desired CallManager Administration: IP address/CCMAdmin link
(where IP address is the IP address of the target SPE310 running
Cisco CallManager).
Log in to CallManager as an administrator.
You can also access Cisco CallManager on the Cisco ICS 7750 by entering the
following URL, replacing IP address with the IP address of an SPE310 running
Cisco CallManager: http://IP address/CCMAdmin.
You can use Terminal Services Client to access the SPE310 desktop, as described
in the following topics:
Accessing the SPE310 Windows Interface Through Terminal Services Client,
•
page 5-9
Accessing the SPE310 Windows Interface Through Directly Connected
•
Peripherals, page 5-9
•
Accessing SPE310s Through Telnet, page 5-11
Chapter 5
Operating the Cisco ICS 7750
78-14165-03
Advertisement
