Table of Contents
Advertisement
NOTE:
3.
Click the
percentage of progress.
This stage may last a few minutes. When it is complete, the Device Upgrade Status field
shows
4.
Click the
The unit reboots. The VNC 325 is using the new firmware and the Device Upgrade
Status field shows
5.
Test the system for correct operation.
6.
If everything is working correctly, click the
field shows
of progress.
This stage may last a few minutes. When it is complete, the Device Upgrade Status field
shows
commited.
NOTE:
7.
Repeat steps 1 through 6 for each codec.
License Page
Each VNC 325 codec is supplied with a feature set that is defined by its license key
and structure. The key and structure are not changed as part of normal operation; this
information is provided for reference only.
The system controller can be licensed to add or remove features. The license is entered when
the unit is manufactured and users should not attempt modify this in any way. If you do
modify these fields, the unit may become unstable.
The remainder of the installation procedure is performed using the forward
button to advance the installation through the various stages. If necessary,
the reverse button can back up a stage. The Device Upgrade Status field
indicates the current stage or the status.
The process lets you temporarily install and test the new firmware and, if it
behaves satisfactorily, permanently install (commit) the new firmware. Up
until the last stage, you can return to the existing firmware version.
Figure 42
summarizes the process.
b
button (
). The Device Upgrade Status field shows
forward
.
READYTOACTIVATE
button.
forward
READYTOCOMMIT
Committing
and the percentage
and the Commited Version field displays the upgrade you just successfully
WAIT
If you experience any problems, click the
end of the activating stage (
VN-Matrix 325 Serial Digital Over IP CODEC • Operation
.
button. The Device Upgrade Status
forward
reverse
display).
READYTOCOMMIT
and the
PREPARE
button to return to the
56
Advertisement
Table of Contents
