Device List Page
Device Field
This field identifies the video format of the devices that are present on the network:
3G — A device that operates at all resolutions up to and including the 3G-SDI standard.
•
•
HDSDI — A device that is operates at all resolutions up to and including the HD-SDI
standard.
•
SDI — A device that operates at resolutions up to the SDI standard.
NOTE:
Device Mode
The Mode column on the Device List tab shows how each VNC 325 unit is configured using
the following icons:
= Encoder
NOTES:
Removing a device from the network
Devices that have been physically removed from the system can be removed from this listing
as follows:
1.
Click the Delete icon ( ) for the device to be removed (see figure 24). A confirmation
dialog box appears.
Figure 24.
2.
Click
OK
All VNC 325 codecs are 3G.
= Decoder
•
The VNM Recorder is not documented in this guide. Inclusion in this list is for
reference only.
•
Only devices that are or have been configured to connect to the system
controller (using the procedure detailed in
are listed.
•
The device list may show more devices than are in your system. This is because
the controller maintains a list of devices that have been used in the past and
are not currently available. In this case, the IP address entry for that device is
blank.
Removing a Device from the Network
in the confirmation dialog box.
VN-Matrix 325 Serial Digital Over IP CODEC • Operation
= VNM Recorder
= Undefined
"Configuring Network
2
Settings")
1
33