Table of Contents
Advertisement
Figure 30.
NOTE:
The
New Export Stream
Bandwidth Management Page and Typical Bit Rates
To access the bandwidth management page (see figure 31), click the
Bandwidth
1
2
Figure 31.
The bandwidth page provides for the control of the spatial and temporal compression
settings for the encoded source.
The available controls consist of two main panels:
a
Bandwidth Management (standard) controls — Provides a simple interface that
configures a subset of the VN-Matrix 325 compression toolset (see
management standard controls
b
Advanced controls — Provides control of the complete VN-Matrix 325 compression
toolset (see
button in the Bandwidth Management panel.
NOTE:
FEC Encoder Streams Panel
This setting does NOT track the same setting applied in other (video, anc,
colfec, and rowfec) encoder configuration pages. For most applications, you
should set the same transport for all stream elements, but this is not mandatory.
function is not supported.
tab on the video encoder configure page.
Bandwidth Management Page
"Advanced controls
panel"). To hide this panel click the
When you hide the Advanced control panel, default settings are applied to
some of the controls. These settings remain in force while the Standard panel
controls are in use and cancel any changes that were made previously.
VN-Matrix 325 Serial Digital Over IP CODEC • Operation
panel").
"Bandwidth
Standard
42
Advertisement
Table of Contents
