Network Interface - Extron electronics VN-Matrix 325 User Manual

Sdi, hd-sdi & 3g-sdi over ip codec
Hide thumbs Also See for VN-Matrix 325:
Table of Contents

Advertisement

b
c

Network Interface

Once all VN-Matrix 325 devices have been correctly set-up for and connected to a network,
any further configuration and operation is via the network interface (built-in HTML pages) of
the unit designated as the controller. The pages can be viewed by any web browser, such as
Mozilla Firefox, version 4.0 or newer (preferred), or Microsoft Internet Explorer, version 6.0
or newer, provide access to various system parameters.
NOTE:
See
device list page (see figure 23).
Figure 23.
Test button — Press and hold to suspend the active stream of the encoder and display
a test pattern on the SDI Out connector
end the test pattern. See
"Test
test patterns.
Reset button (to the left of the LAN 2 LED) — Insert a straightened paper clip into
the hole on the front panel and press and release to reboot the operating system.
Whichever browser you use, it must be configured to accept cookies and be
JavaScript-enabled.
"Startup and
Login", on page 25, to access the network interface and down load the
Device List Page
f
in figure 2 and on page 7). Release to
(item
Pattern" in the "Reference Information" section for the
VN-Matrix 325 Serial Digital Over IP CODEC • Operation
32

Advertisement

Table of Contents
loading

Table of Contents