Table of Contents
Advertisement
Control buttons
Primary functions
Action:
Indication:
Blinking: save needed
Secondary functions
Port
Action 1:
configuration
Action 2/
indication:
Front panel
Action:
locks
Audio buttons, select
toggle between mode
RGB delay
Action:
Audio
Action:
e
N •
MPX Plus 866 A Media Presentation Matrix Switcher • Operation
Save changes
Select Preset mode
Blinking: Save preset
Lit: Recall preset
ENTER
PRESET
Select 9600 baud.
Select 19200 baud.
Blinking: selected
Blinking: selected
With Video and
Lock mode 2 and/or
0 and mode 2.
Enter button — The Enter button has one primary function (•) and three
secondary (❏) functions:
•
Save configuration or preset changes that you make on the front panel
and indicate that a potential change has been created but not saved. To
create a simple configuration:
Specify video, audio, or both (see I/O selection buttons [
Press the desired input button (
Press the desired output button(s) (
Press the Enter button.
Video outputs in the computer video group (
computer video input (
•
Video outputs in the low resolution video group (
low resolution video input (
•
Audio can be tied only to outputs 1 through 6. If you make a video and
audio tie from the low resolution video group (inputs 9 through 14), audio is
automatically tied to an output in the computer group (outputs 1 through 6).
With the Preset, View, and Esc buttons, select Serial Port Selection and
❏
Configuration mode. See "Selecting the RS-232 Primary port's baud rate"
on page 3-42.
Select 9600 baud for the rear panel RS-232 port in Serial Port Selection and
❏
Configuration mode and indicate the selection. See "Selecting the RS-232
Primary port's baud rate" on page 3-42.
With the Video and Audio buttons, select front panel security
❏
Lock mode 2 or toggle between mode 0 (unlocked) and mode 2. See
"Setting the front panel locks (Executive modes)" on page 3-44.
Select View mode
View mode selected
VIEW
Select Configuration mode
Select 38400 baud.
Blinking: selected
Computer video output group:
In Video mode,
decrease the
switching interval.
In Audio mode,
decrease input level
or output volume.
a
or
b
)
c
or
d
c
) can be tied only to a
a
).
d
b
).
Cancel/escape
Flashes once
ESC
Select 115200 baud.
Blinking: selected
In Video mode,
increase the
switching interval.
In Audio mode,
increase input level
or output volume.
i
] and [
j
])
)
) can be tied only to a
3-5
Advertisement
Table of Contents
