Table of Contents
Advertisement
Reset button
n
Reset button and LED — The Reset button initiates four levels
of reset to the matrix switcher. The LED indicates the reset mode
activated. Press and hold the button while the switcher is running or
while you power up the switcher for different reset levels.
See "Rear panel Operations" in chapter 3, "Operation", for details.
•
Events (mode 3) reset — Toggles events monitoring on and off.
•
IP settings (mode 4) reset — Resets the switcher's IP functions.
N IP settings reset does not replace any user-installed firmware.
•
Absolute (mode 5) reset — Restores the switcher to the default factory
conditions.
•
Hard (mode 1) reset — Restores the switcher to the base firmware.
N Hard reset does not clear the current configuration.
Power
o
AC power connector — Plug a standard IEC power cord into this connector to
connect the switcher to a 100 VAC to 240 VAC, 50-60 Hz power source.
MPX Plus 866 A Media Presentation Matrix Switcher • Installation
RESET
2-9
Advertisement
Table of Contents
